herunterladen
2010 Microchip Technology Inc. DS41284E-page 1
PIC12F609/12F615/12F617/16F610/16F616 AND
PIC12HV609/12HV615/16HV610/16HV616
1.0 DEVICE OVERVIEW
This document includes the programming
specifications for the following devices:
2.0 PROGRAMMING THE
PIC12F609/12F615/12F617/
16F610/16F616 AND
PIC12HV609/12HV615/16HV610/
16HV616 DEVICES
The PIC12F609/12F615/12F617/16F610/16F616 and
PIC12HV609/12HV615/16HV610/16HV616 devices are
programmed using a serial method. The Serial mode will
allow these devices to be programmed while in the user’s
system. These programming specifications apply to all of
the above devices in all packages.
2.1 Hardware Requirements
These devices require one power supply for VDD, see
Table 7-1 V
DD, and one for VPP, see Table 7-1 VIHH.
2.2 Program/Verify Mode
The Program/Verify mode for these devices allows pro-
gramming of user program memory, user ID locations,
Calibration Word and the Configuration Word.
•PIC12F615 •PIC12HV615
•PIC12F609 •PIC12HV609
•PIC12F617 •PIC16HV616
•PIC16F616 •PIC16HV610
•PIC16F610
Note 1: All references to the PIC12F615 parts
refer to the PIC12HV615 parts as well
(unless otherwise specified).
2: All references to the PIC16F616 parts
refer to the PIC16HV616 as well (unless
otherwise specified).
3: All references to the PIC12F609 parts
refer to the PIC12HV609 as well (unless
otherwise specified).
4: All references to the PIC16F610 parts
refer to the PIC16HV610 as well (unless
otherwise specified).
5: Any references in this programming
specification to PORTA and RAn refer to
GPIO and GPn, respectively.
Flash Memory Programming Specification
Verzeichnis