herunterladen
1 of 5
© 2017 TE Connectivity family of companies
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
PRODUCT INFORMATION
1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
Application Specification
114-1012
04 JAN 17 Rev H
NOTE
All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
Unless otherwise specified, dimensions have a tolerance of ±0.13 [±.005] and angles have a tolerance of ±2°. Figures and
illustrations are for identification only and are not drawn to scale.
1. INTRODUCTION
This specification covers the requirements for application of Commercial MATE-N-LOK pin and socket
Contacts. These requirements are applicable to hand or automatic machine crimping tools. For specific wire
and insulation ranges relative to the products covered in this specification, see Figures 4 and 5.
Use the terminology provided in this specification to facilitate inquiries for information. Basic terms and features
of this product are provided in Figure 1.
Figure 1
2. REFERENCE MATERIAL
2.1. Revision Summary
Revisions to this application specification include:
Changed hand tool for first pin and socket in Figure 5
2.2. Customer Assistance
Reference Product Base Part Numbers 61091 and 60909 and Product Code 1340 are representative of
Commercial MATE-N-LOK pin and socket contacts. Use of these numbers will identify the product line and help
you to obtain product and tooling information when visiting
www.te.com or calling the number at the bottom of
this page.
2.3. Drawings
Customer drawings for product part numbers are available from
www.te.com. Information contained in the
customer drawing takes priority.
Commercial MATE-N-LOK*
Pin and Socket Contacts
Wire Barrel
Wire Barrel Seam
Front Cutoff Tab
Embossments
Insulation Barrel
Front Bellmouth
Rear Bellmouth
Socket
Front Cutoff Tab
Pin
Locking Lances
Rear Cutoff Tab
Verzeichnis
- ・ Technische Daten on Seite 2
- ・ Teilenummernliste on Seite 4 Seite 5
