herunterladen
VBUS
D-
D+
GND
USB3.0 Port
0.1 µF
5V Source
USB Transceiver
TPD3S0x4
OUT
IN
D1 D2
EN
From Processor
150 µF
GND
VBUS
D-
D+
TX+
TX-
RX+
RX-
GND
TPD4E05U06
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TPD3S014
,
TPD3S044
SLVSCP4B –OCTOBER 2014–REVISED AUGUST 2015
TPD3S0x4 Current Limit Switch and D+/D – ESD Protection for USB Host Ports
1 Features 3 Description
The TPD3S0x4s are integrated devices that feature a
1
• Continuous Current Ratings of 0.5 A and 1.5 A
current-limited load switch and a two-channel
• Fixed, Constant Current Limits of 0.85 A and
transient voltage suppressor (TVS) based
2.15 A (Typ)
electrostatic discharge (ESD) protection diode array
• Fast Overcurrent Response – 2 μs
for USB interfaces.
• Integrated Output Discharge
The TPD3S0x4 devices are intended for applications
• Reverse Current Blocking
such as USB where heavy capacitive loads and
short-circuits are likely to be encountered;
• Short-Circuit Protection
TPD3S0x4s provide short-circuit protection and
• Over Temperature Protection With Auto-Restart
overcurrent protection. The TPD3S0x4s limit the
• Built-In Soft Start
output current to a safe level by operating in constant
current mode when the output load exceeds the
• Ambient Temperature Range: –40°C to 85°C
current limit threshold. The fast overload response
• Product Regulatory Compliance
eases the burden on the main 5-V power supply by
– UL Recognized Component (UL 2367,
quickly regulating the power when the output is
Standard for Solid State Overcurrent
shorted. The rise and fall times for the current limit
Protectors)
switch are controlled to minimize current surges when
turning the device on and off.
– CB File No. E169910 to IEC 60950-1,
Information Technology Equipment
The TPD3S014 and TPD3S044 will allow 0.5 A and
1.5 A of continuous current, respectively. The TVS
• IEC 61000-4-2 Level 4 ESD Protection (External
diode array is rated to dissipate ESD strikes above
Pins)
the maximum level specified in the IEC 61000-4-2
– ±12-kV Contact Discharge (IEC 61000-4-2)
international standard.
– ±15-kV Air Gap Discharge (IEC 61000-4-2)
The high level of integration, combined with its easy-
to-route DBV package, allows this device to provide
2 Applications
great circuit protection for USB interfaces in
• End Equipment:
applications like laptops, high-definition digital TVs,
set-top boxes, and electronic point of sale equipment.
– Electronic Point of Sale (ESOP)
– USB Hubs
Device Information
(1)
– Laptops, Desktops
PART NUMBER PACKAGE BODY SIZE (NOM)
– High-Definition Digital TVs
2.90 mm × 2.80 mm
TPD3S0x4 DBV (6)
× 1.45 mm
– Set-Top Boxes
(1) For all available packages, see the orderable addendum at
• Interfaces:
the end of the data sheet.
– USB Ports
– 5-V Power Rails
Simplified Schematic
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Verzeichnis
- ・ Konfiguration des Pinbelegungsdiagramms on Seite 3
- ・ Abmessungen des Paketumrisses on Seite 24 Seite 26 Seite 27
- ・ Markierungsinformationen on Seite 3 Seite 24
- ・ Blockdiagramm on Seite 1 Seite 12 Seite 16 Seite 19
- ・ Typisches Anwendungsschaltbild on Seite 16
- ・ Technische Daten on Seite 4
- ・ Anwendungsbereich on Seite 1 Seite 14 Seite 15 Seite 16 Seite 19
- ・ Elektrische Spezifikation on Seite 5 Seite 6 Seite 13 Seite 14
