herunterladen
This is information on a product in full production.
October 2013 DocID17362 Rev 6 1/37
VND5E006ASP-E
Double channel high-side driver with analog current sense
for automotive applications
Datasheet
-
production data
Features
• General
– Very low standby current
– 3.0 V CMOS compatible inputs
– Optimized electromagnetic emissions
– Very low electromagnetic susceptibility
– Compliance with European directive
2002/95/EC
– Very low current sense leakage
• Diagnostic functions
– Proportional load current sense
– High current sense precision for wide
currents range
– Current sense disable
– Off-state openload detection
– Output short to V
CC
detection
– Overload and short to ground (power
limitation) indication
– Thermal shutdown indication
• Protection
– Undervoltage shutdown
– Overvoltage clamp
– Load current limitation
– Self limiting of fast thermal transients
– Protection against loss of ground and loss
of V
CC
– Overtemperature shutdown with auto
restart (thermal shutdown)
– Inrush current active management by
power limitation
– Reverse battery protected with self switch
of the PowerMOS
– Electrostatic discharge protection
Applications
• All types of resistive, inductive and capacitive
loads
Description
The VND5E006ASP-E is a double channel
high-side driver manufactured using ST
proprietary VIPower™ M0-5 technology and
housed in PowerSO-16 package. The device is
designed to drive 12
V automotive grounded
loads, and to provide protection and diagnostics.
They also implement a 3
V and 5 V CMOS
compatible interface for the use with any
microcontroller.
The device integrates advanced protective
functions such as load current limitation, inrush
and overload active management by power
limitation, overtemperature shut-off with auto
restart and overvoltage active clamp. A dedicated
analog current sense pin is associated with every
output channel providing enhanced diagnostic
functions including fast detection of overload and
short-circuit to ground through power limitation
indication, overtemperature indication, short-
circuit to V
CC
diagnosis and on-state and off-state
open-load detection. The current sensing and
diagnostic feedback of the whole device can be
disabled by pulling the CS_DIS pin high to share
the external sense resistor with similar devices.
Max transient supply voltage V
CC
41 V
Operating voltage range V
CC
4.5 to 28 V
Typ on-state resistance (per ch.) R
ON
5 mΩ
Current limitation (typ) I
LIMH
100 A
Off-state supply current I
S
2 µA
(1)
1. Typical value with all loads connected.
PowerSO-16
www.st.com
Verzeichnis
