Web Analytics
Datasheet
Teiledatenblatt > Analog Switch Ic, Analog Switch Multiplexer > ADI > ADG5249FBCPZ-RL7 Datenblatt-PDF > ADG5249FBCPZ-RL7 Benutzerreferenzhandbuch Seite 1/15
ADG5249FBCPZ-RL7
€ 6.08
Preis von AiPCBA

ADG5249FBCPZ-RL7 Benutzerreferenzhandbuch - ADI

Aktualisierte Uhrzeit: 2025-06-15 22:31:16 (UTC+8)

ADG5249FBCPZ-RL7 Benutzerreferenzhandbuch

Seite:von 15
PDF herunterladen
Neu laden
herunterladen
EVAL-ADG5249FEBZ User Guide
UG-878
One Technology Way P. O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com
Evaluation Board for the ADG5249F, Overvoltage Protected Dual 4:1 Multiplexer
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 15
FEATURES
Supply voltages
Dual supply: ±5 V to ±22 V
Single supply: 8 V to 44 V
Protected against overvoltage on source pins
Signal voltages up to −55 V and +55 V
LEDs for visual overvoltage indication
Parallel interface compatible with 3 V logic
On-board LDO regulator for digital supply and control,
if required
EVALUATION KIT CONTENTS
EVAL-ADG5249FEBZ evaluation board
DOCUMENTS NEEDED
ADG5249F data sheet
EVAL-ADG5249FEBZ user guide
EQUIPMENT NEEDED
DC voltage source
±22 V for dual supply
44 V for single supply
Optional digital logic supply: 3 V to 5 V
Analog signal source
Method to measure voltage, such as a digital multimeter (DMM)
GENERAL DESCRIPTION
The EVAL-ADG5249FEBZ is the evaluation board for the
ADG5249F, which features an overvoltage protected dual 4:1
multiplexer. The ADG5249F has overvoltage detection and
protection circuitry on the source pins and is protected against
signals up to −55 V and +55 V in both the powered and
unpowered states.
Figure 1 shows the EVAL-ADG5249FEBZ in a typical evaluation
setup. The ADG5249F is soldered to the center of the evaluation
board and wire screw terminals are provided to connect to each
of the source and drain pins. Three screw terminals power the
device, with a fourth terminal used to provide a user defined digital
logic supply voltage, if required. Alternatively, a low dropout (LDO)
regulator is provided for 5 V digital logic supply and to supply
the LEDs, which are mounted to provide visual indication of the
fault status of the switch.
Full specifications on the ADG5249F are available in the product
data sheet, which should be consulted in conjunction with this
user guide when using the evaluation board.
Verzeichnis

ADG5249FBCPZ-RL7 Datenblatt-PDF

ADG5249FBCPZ-RL7 Datenblatt PDF
ADI
35 Seiten, 645 KB
ADG5249FBCPZ-RL7 Benutzerreferenzhandbuch
ADI
15 Seiten, 621 KB
ADG5249FBCPZ-RL7 Anderes Datenblatt
ADI
33 Seiten, 657 KB
ADG5249FBCPZ-RL7 Verpackung
ADI
7 Seiten, 734 KB

ADG5249 Datenblatt-PDF

ADG5249FBRUZ
Datenblatt PDF
ADI
ANALOG DEVICES ADG5249FBRUZ 4:1 Analog Multiplexer IC, Dual, 480Ω, ± 5V to ± 22V, TSSOP-20
ADG5249FBRUZ-RL7
Benutzerreferenzhandbuch
ADI
Multiplexer Switch ICs +/-55V OV Detect +5V +/-25V Dual 4:1Mux
ADG5249FBCPZ-RL7
Datenblatt PDF
ADI
Analog Multiplexer Dual 4: 1 20Pin LFCSP EP T/R
ADG5249F
Benutzerreferenzhandbuch
ADI
User Defined Fault Protection and Detection, 0.8 pC QINJ, Dual 4:1 Multiplexers
Datenblatt-PDF-Suche
Suche
100 Millionen Datenblatt-PDF, aktualisieren Sie mehr als 5.000 PDF-Dateien pro Tag.
Kontakt online
Bonnie - AiPCBA Sales Manager Online, vor 5 Minuten
Ihre E-Mail *
Nachricht *
Senden