herunterladen
1
2
3
4
5
10
9
8
7
6
+ V
REF
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
V-
LM185-2.5QML
www.ti.com
SNVS385A –NOVEMBER 2005–REVISED MARCH 2013
Micropower Voltage Reference Diode
Check for Samples: LM185-2.5QML
1
FEATURES
DESCRIPTION
The LM185-2.5 are micropower 2-terminal band-gap
2
• Operating Current of 20 μA to 20 mA
voltage regulator diodes. Operating over a 20 μA to
• 0.6Ω Dynamic Impedance (A grade)
20 mA current range, they feature exceptionally low
• Low Temperature Coefficient
dynamic impedance and good temperature stability.
On-chip trimming is used to provide tight voltage
• Low Voltage Reference—2.5V
tolerance. Since the LM185-2.5 band-gap reference
uses only transistors and resistors, low noise and
good long term stability result.
Careful design of the LM185-2.5 has made the device
exceptionally tolerant of capacitive loading, making it
easy to use in almost any reference application. The
wide dynamic operating range allows its use with
widely varying supplies with excellent regulation.
The extremely low power drain of the LM185-2.5
makes it useful for micropower circuitry. This voltage
reference can be used to make portable meters,
regulators or general purpose analog circuitry with
battery life approaching shelf life. Further, the wide
operating current allows it to replace older references
with a tighter tolerance part. For applications requiring
1.2V see LM185-1.2.
Connection Diagram
Figure 1. CLGA Package-Top View Figure 2. PFM Metal Can Package- Bottom View
See Package Number NAC See Package Number NDU
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Copyright © 2005–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Verzeichnis
