User's Guide
SNVA209C–January 2007–Revised April 2013
AN-1569 LM5575 Evaluation Board
1 Introduction
The LM5575 evaluation board is designed to provide the design engineer with a fully functional power
converter based on emulated current mode control to evaluate the LM5575 regulator IC. The evaluation
board provides a 5V output with a 1.5A current capability. The ultra-wide input voltage ranges from 7V to
75V. The design operates at 300kHz, a good compromise between conversion efficiency and solution
size. The printed circuit board consists of 2 layers of 2 ounce copper on FR4 material with a thickness of
0.06 inches. This application note contains the evaluation board schematic, Bill-of-Materials (BOM) and a
quick setup procedure. Refer to the LM5575 75V, 1.5A Step-Down Switching (SNVS471) data sheet for
complete circuit design information.
The performance of the evaluation board is as follows:
Input Range: 7 to 75V
Output Voltage: 5V
Output Current: 0 to 1.5A
Frequency of Operation: 300 KHz
Board Size: 2.6 X 1 X 0.4 inches
Load Regulation: 1%
Line Regulation: 0.1%
Over Current Limiting
All trademarks are the property of their respective owners.
1
SNVA209C–January 2007–Revised April 2013 AN-1569 LM5575 Evaluation Board
Submit Documentation Feedback
Copyright © 2007–2013, Texas Instruments Incorporated
Verzeichnis
- ・ Blockdiagramm on Seite 2
- ・ Anwendungsbereich on Seite 8
- ・ Elektrische Spezifikation on Seite 3 Seite 4
