herunterladen
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
Reference
Design
TUSB3410, TUSB3410I
SLLS519I –MARCH 2002–REVISED NOVEMBER 2015
TUSB3410x USB to Serial Port Controller
1 Device Overview
• Enhanced UART Features:
1.1 Features
– Software and Hardware Flow Control
1
• Fully Compliant With USB 2.0 Full-Speed
– Automatic RS-485 Bus Transceiver Control,
Specifications: TID#40340262
With and Without Echo
• Supports 12-Mbps USB Data Rate (Full Speed)
– Selectable IrDA Mode for Up to 115.2-kbps
Transfer
• Supports USB Suspend, Resume, and Remote
Wake-Up Operations
– Software-Selectable Baud Rate From 50 BPS to
921.6 kbps
• Configurable to Bus-Powered and Self-Powered
Operation
– Programmable Serial-Interface Characteristics
• Supports a Total of Three Input and Three Output
• 5-, 6-, 7-, or 8-Bit Characters
(Interrupt, Bulk) Endpoints
• Even, Odd, or No Parity-bit Generation and
• Integrated 8052 Microcontroller With:
Detection
– 256 × 8 RAM for Internal Data
• 1-, 1.5-, or 2-Stop Bit Generation
– 10K × 8 ROM (With USB and I
2
C Bootloader)
– Line Break Generation and Detection
– 16K × 8 RAM for Code Space Loadable From
– Internal Test and Loopback Capabilities
Host or I
2
C Port
– Modem Control Functions (CTS, RTS, DSR, RI
– 2K × 8 Shared RAM Used for Data Buffers and
and DCD)
Endpoint Descriptor Blocks (EDBs)
– Internal Diagnostic Capability
– Master I
2
C Controller for EEPROM Device
• Loopback Control for Communications
Access
Link-Fault Isolation
– MCU Operates at 24 MHz, Providing 2-MIPS
• Break, Parity, Overrun, Framing-Error
Operation
Simulation
– 128-ms Watchdog Timer
1.2 Applications
• Modems • Medical Meters
• Peripherals: • DSP and µC Interface
Printers, Handheld Devices, and so on
1.3 Description
The TUSB3410 device provides bridging between a USB port and an enhanced UART serial port. The
device contains an 8052 microcontroller unit (MCU) with 16KB of RAM that can be loaded from the host or
from the external onboard memory through an I
2
C. The device also contains 10KB of ROM that allows the
MCU to configure the USB port at boot time. The ROM code also contains an I
2
C bootloader. All device
functions (such as the USB command decoding, UART setup, and error reporting) are managed by the
internal MCU firmware in unison with the PC host.
Device Information
PART NUMBER PACKAGE BODY SIZE
VQFN (32) 5.00 mm × 5.00 mm
TUSB3410
LQFP (32) 7.00 mm × 7.00 mm
1. For all available packages, see the orderable addendum at the end of the data sheet.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Verzeichnis
- ・ Konfiguration des Pinbelegungsdiagramms on Seite 4 Seite 5
- ・ Abmessungen des Paketumrisses on Seite 93 Seite 95 Seite 96 Seite 100
- ・ Paket-Footprint-Pad-Layout on Seite 101
- ・ Markierungsinformationen on Seite 93 Seite 94
- ・ Blockdiagramm on Seite 2 Seite 11 Seite 85 Seite 86
- ・ Typisches Anwendungsschaltbild on Seite 84
- ・ Technische Daten on Seite 1 Seite 6 Seite 7 Seite 8 Seite 9
- ・ Anwendungsbereich on Seite 1 Seite 106
- ・ Elektrische Spezifikation on Seite 7
