herunterladen
Industrial Current/Voltage Output Driver
with Programmable Ranges
AD5750
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 www.analog.com
Fax: 781.461.3113 ©2009 Analog Devices, Inc. All rights reserved.
FEATURES
Current output ranges: 4 mA to 20 mA, 0 mA to 20 mA or
0 mA to 24 mA, ±20 mA, and ±24 mA
±0.03% FSR total unadjusted error (TUE)
±5 ppm/°C typical output drift
Voltage output ranges: 0 V to 5 V, 0 V to 10 V, ±5 V, and ±10 V,
with 20% overrange
±0.02% FSR total unadjusted error (TUE)
±3 ppm/°C output drift
Flexible serial digital interface
On-chip output fault detection
PEC error checking
Asynchronous CLEAR function
Flexible power-up condition to 0 V or tristate
Power supply range
AVDD: +12 V (± 10%) to +24 V (± 10%)
AVSS: −12 V (± 10%) to −24 V (± 10%)
Output loop compliance to AV
DD
− 2.75 V
Temperature range: −40°C to +105°C
32-lead 5 mm × 5 mm LFCSP package
APPLICATIONS
Process control
Actuator control
PLCs
GENERAL DESCRIPTION
The AD5750 is a single-channel, low cost, precision, voltage/
current output driver with hardware or software programmable
output ranges. The software ranges are configured via an SPI-/
MICROWIRE™-compatible serial interface. The AD5750 targets
applications in PLC and industrial process control. The analog
input to the AD5750 is provided from a low voltage, single-supply,
digital-to-analog converter (DAC) and is internally conditioned
to provide the desired output current/voltage range. The analog
input range is 0 V to 4.096 V.
The output current range is programmable across five current
ranges: 4 mA to 20 mA, 0 mA to 20 mA or 0 mA to 24 mA,
±20 mA, and ±24 mA.
Voltage output is provided from a separate pin that can
be configured to provide 0 V to 5 V, 0 V to 10 V, ±5 V, or
±10 V output ranges. An overrange of 20% is available on the
voltage ranges.
Analog outputs are short-circuit and open-circuit protected and
can drive capacitive loads of 1 μF and inductive loads of 0.1 H.
The device is specified to operate with a power supply range from
±12 V to ±24 V. Output loop compliance is 0 V to AV
DD
− 2.75 V.
The flexible serial interface is SPI and MICROWIRE
compatible and can be operated in 3-wire mode to minimize
the digital isolation required in isolated applications. The
interface also features an optional PEC error checking feature
using CRC-8 error checking, useful in industrial environments
where data communication corruption can occur.
The device also includes a power-on-reset function ensuring
that the device powers up in a known state (0 V or tristate),
and an asynchronous CLEAR pin that sets the outputs to zero
scale/midscale voltage output or the low end of the selected
current range.
A HW SELECT pin is used to configure the part for hardware
or software mode on power-up.
Table 1. Related Device
Part Number Description
AD5422
Single-channel, 16-bit, serial input current
source and voltage output DAC
Verzeichnis
- ・ Konfiguration des Pinbelegungsdiagramms on Seite 11 Seite 33
- ・ Abmessungen des Paketumrisses on Seite 33
- ・ Teilenummerierungssystem on Seite 33
- ・ Blockdiagramm on Seite 3
- ・ Beschreibung der Funktionen on Seite 1 Seite 11 Seite 33
- ・ Technische Daten on Seite 1 Seite 4 Seite 10
- ・ Anwendungsbereich on Seite 1 Seite 31
- ・ Elektrische Spezifikation on Seite 13
