herunterladen
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
TMS320C6743
www.ti.com
SPRS565D –APRIL 2009–REVISED JUNE 2014
TMS320C6743 Fixed- and Floating-Point Digital Signal Processor
1 TMS320C6743 Fixed- and Floating-Point Digital Signal Processor
1.1 Features
1
– Normalization, Saturation, Bit-Counting
• Applications
– Compact 16-Bit Instructions
– Networking
• C674x Two-Level Cache Memory Architecture
– High-Speed Encoding
– 32KB of L1P Program RAM/Cache
– Professional Audio™
– 32KB of L1D Data RAM/Cache
• Software Support
– 128KB of L2 Unified Mapped RAM/Cache
– TI DSP/BIOS™
– Flexible RAM/Cache Partition (L1 and L2)
– Chip Support Library and DSP Library
• Enhanced Direct Memory Access Controller 3
• 375-MHz TMS320C674x Fixed- and Floating-Point
(EDMA3):
VLIW DSP Core
– 2 Transfer Controllers
– Load-Store Architecture with Nonaligned
Support – 32 Independent DMA Channels
– 64 General-Purpose Registers (32-Bit) – 8 Quick DMA Channels
– Six ALU (32- and 40-Bit) Functional Units – Programmable Transfer Burst Size
• 3.3-V LVCMOS I/Os
• Supports 32-Bit Integer, SP (IEEE Single
Precision/32-Bit) and DP (IEEE Double
• Two External Memory Interfaces:
Precision/64-Bit) Floating Point
– EMIFA
• Supports up to Four SP Additions Per Clock,
• NOR (8-Bit-Wide Data)
Four DP Additions Every 2 Clocks
• NAND (8-Bit-Wide Data)
• Supports up to Two Floating Point (SP or
– EMIFB
DP) Reciprocal Approximation (RCPxP) and
• 16-bit SDRAM, up to 128MB
Square-Root Reciprocal Approximation
• Two Configurable 16550-Type UART Modules:
(RSQRxP) Operations Per Cycle
– UART0 with Modem Control Signals
– Two Multiply Functional Units
– 16-Byte FIFO
• Mixed-Precision IEEE Floating Point Multiply
– 16x or 13x Oversampling Option
Supported up to:
• One Serial Peripheral Interface (SPI) with One
– 2 SP x SP -> SP Per Clock
Chip Select
– 2 SP x SP -> DP Every Two Clocks
• Multimedia Card (MMC)/Secure Digital (SD)
– 2 SP x DP -> DP Every Three Clocks
• Two Master and Slave Inter-Integrated Circuit (I
2
C
– 2 DP x DP -> DP Every Four Clocks
Bus™)
• Fixed-Point Multiply Supports Two 32 x 32-
• Programmable Real-Time Unit Subsystem
Bit Multiplies, Four 16 x 16-Bit Multiplies, or
(PRUSS)
Eight 8 x 8-Bit Multiplies per Clock Cycle,
– Two Independent Programmable Real-Time Unit
and Complex Multiples
(PRU) Cores
– Instruction Packing Reduces Code Size
• 32-Bit Load-Store RISC Architecture
– All Instructions Conditional
• 4KB of Instruction RAM per Core
– Hardware Support for Modulo Loop
• 512 Bytes of Data RAM per Core
Operation
• PRUSS can be Disabled Through Software
– Protected Mode Operation
to Save Power
– Exceptions Support for Error Detection and
• Register 30 of each PRU is Exported from
Program Redirection
the Subsystem in Addition to the Normal R31
• C674x Instruction Set Features
Output of the PRU Cores
– Superset of the C67x+ and C64x+ ISAs
– Standard Power-Management Mechanism
– 3000 MIPS and 2250 MFLOPS C674x
• Clock Gating
– Byte-Addressable (8-, 16-, 32-, and 64-Bit Data)
• Entire Subsystem Under a Single PSC Clock
– 8-Bit Overflow Protection
Gating Domain
– Bit-Field Extract, Set, Clear
– Dedicated Interrupt Controller
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Verzeichnis
- ・ Konfiguration des Pinbelegungsdiagramms on Seite 21 Seite 73
- ・ Abmessungen des Paketumrisses on Seite 145
- ・ Markierungsinformationen on Seite 145
- ・ Blockdiagramm on Seite 4 Seite 8 Seite 70 Seite 89 Seite 99
- ・ Technische Daten on Seite 39 Seite 43 Seite 44 Seite 45 Seite 46
- ・ Anwendungsbereich on Seite 1 Seite 2
- ・ Elektrische Spezifikation on Seite 42 Seite 43 Seite 44 Seite 45 Seite 46
