herunterladen
MIC22400
4A Integrated Switch Synchronous
Buck Regulator with Frequency
Programmable up to 4MHz
Ramp Control is a trademark of Micrel, Inc.
MLF and MicroLeadFrame are registered trademarks of Amkor Technology, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
General Description
The Micrel MIC22400 is a high-efficiency, 4A integrated
switch synchronous buck (step-down) regulator. The
MIC22400 is optimized for highest efficiency, achieving
over 90% efficiency while still switching at 1MHz over a
broad load range. The ultra-high-speed control loop keeps
the output voltage within regulation even under extreme
transient load swings commonly found in FPGAs and low-
voltage ASICs. The output voltage can be adjusted down
to 0.7V to address all low-voltage power needs. The
MIC22400 gives a full range of sequencing and tracking
options. The EN/DLY pin combined with the Power-On-
Reset (POR) pin allows multiple outputs to be sequenced
in any way on turn-on and turn-off. The Ramp Control™
(RC) pin allows the device to be connected to another
MIC22400 family of products to keep the output voltages
within a certain V on start-up.
The MIC22400 is available in a 20-pin 3mm x 4mm MLF
®
and thermally-enhanced 20-pin ePad TSSOP with a
junction operating range from –40°C to +125°C.
Data sheets and support documentation can be found on
Micrel’s web site at: www.micrel.com
.
Features
• Input voltage range: 2.6V to 5.5V
• Output voltage adjustable down to 0.7V
• Output load current up to 4A
• Full sequencing and tracking ability
• Power-On-Reset (POR)
• Efficiency > 90% across a broad load range
• Programmable frequency 300kHz to 4MHz
• Easy Ramp Control™ (RC) compensation
• Ultra-fast transient response
• 100% maximum duty cycle
• Fully-integrated MOSFET switches
• Micropower shutdown
• Thermal-shutdown and current-limit protection
• 20-pin 3mm x 4mm MLF
®
• 20-pin ePad TSSOP
• –40°C to +125°C junction temperature range
Applications
• High power density point-of-load conversion
• Servers and routers
• DVD recorders
• Computing peripherals
• Base stations
• FPGAs, DSP and low-voltage ASIC power
Typical Application
MIC22400 4A Synchronous Buck Regulator
Sequencing & Tracking
June 2011
M9999-061511-F
Verzeichnis
- ・ Konfiguration des Pinbelegungsdiagramms on Seite 2 Seite 3
- ・ Abmessungen des Paketumrisses on Seite 25 Seite 26
- ・ Paket-Footprint-Pad-Layout on Seite 22 Seite 23 Seite 24
- ・ Teilenummerierungssystem on Seite 2
- ・ Blockdiagramm on Seite 10 Seite 19 Seite 20
- ・ Typisches Anwendungsschaltbild on Seite 1 Seite 10
- ・ Beschreibung der Funktionen on Seite 1 Seite 11
- ・ Anwendungsbereich on Seite 1 Seite 11
